Tabla de contenido
Idiomas disponibles
Idiomas disponibles
the card position of the bracket.
• Connect the power line and horn wire, and fix the stator on the vehicle. Push
EN
main engine into bracket and tighten nuts
3. Uninstall the host
Loosen the fixing nuts of stators; Insert two pieces of disassembly keys into the
gaps on the left and right sides at the same time, hook the disassembly key to the
host and pull it out gently to make the machine separate from the bracket. Then,
remove the power line and horn wire, and unplug the antenna plug.
MAINTENANCE
1. Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth.
Failure to observe this precaution may result in damage to the monitor or unit.
2. Cleaning the connector: Wipe off dirt on the connector of the unit and
faceplate. Use a cotton swab or cloth.
TECHNICAL SPECIFICATIONS
Frequency response
SNR
Channel separation
Voltage harmonic distortion (1kHz)
Balance of play stereo channel
BT version:
Frequency range:
Radio frequency max output power:
Power voltage
Loudspeaker impedance
Rated output power
Size
52
MP3 PLAYING PART
100 Hz - 10,000 Hz (±5 dB)
≥45 dB
≥30 dB
≤5%
≤3 dB
BLUETOOTH TUNER
5.0
2402 ~ 2480MHz
-1.60dBm
GENERAL INDICATORS
DC 12V
4-8 Ω
45 W × Channel 4
178 mm (W) × 50 mm (H) × 100 mm (D)
Tabla de contenido
