Technical Data - Dr. Brown's Customflow BF100 Manual Del Usuario

Technical Data

Double Electric Pump Motor
Vacuum Range: Cycle Rate:
-35 to -230 mmHg 36 – 63 cpm Continuous
Operation Conditions:
40ºC
%
5ºC 15%
Temperature Humidity
Power Supply
AC Wall Plug Adapter: Input: 100-240VAC 50/60 Hz 0.3A Max
EMF Compatibility
Wireless Statement:
Wireless communications equipment such as wireless home network devices, mobile phones, cordless telephones and
their base stations, walkie-talkies can a ect the electric breast pump and should be kept at least a distance 1.0 m away
from the equipment. Electromagnetic Compatibility (EMC, IEC 60601-1-2:2007, Table 1)
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Stacking:
The electric breast pump should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is
necessary, the electric breast pump should be observed to verify normal operation in the con guration in which it will be used.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
21
Mode of operation: Weight:
85% 106 kPa
70 kPa
Atmospheric Pressure
Output: 6 VDC, 2.0A
715 g
Transport/Storage Environment:
50ºC
-20ºC 10%
Temperature Humidity
AC Adapter Model: YMK-12W060200
95% 106 kPa
%
50 kPa
Atmospheric Pressure