Installation - Klarstein METROBREEZE ROM Manual De Instrucciones

EN
34

INSTALLATION

Location
Place the device on a dry, level surface. Leave at least 50 cm of space around the
unit so that the air can circulate sufficiently.
Attach exhaust air hose
• Attach the hose with the round
end to the device.
• To do this, attach the round end to
the unit as shown in the picture.
• Connect the flat end to the
window seal. To do this, install the
seal on the nearest window. There
should be no obstacles within 50
cm of the window so that the air
can flow freely.
Important notes on the exhaust air hose
• The hose is between 60 cm • 170 cm long (including adapter). We recommend
you to use the minimum length to save energy.
• The exhaust air hose was manufactured specifically for this unit. Do not use
any other hose that is longer or made of other materials. Otherwise, the
device could be damaged.