2- Programmation Menus; Navigation Instructions - Kohler VERSO50 Manual De Uso

2- PROGRAMMATION MENUS

2- 1 Navigation instructions

Entering global setup, pressing the MENU button, you have to insert the correct password to access to the programmation menu.
The password, by default, is 809. If you enter the wrong password, you will see the indication "wrong code" and you will not be able
to enter inside the menu. To change the password, see the Security setup.
The correct password
is, by default, 809
If the password is correct, press the DOWN arrow to select the icon (A) and confirm with "i" to enter in the programmation menus.
A) Mains setup
B) Alternator setup
C) Test setup
D) General setup
If the HELP symbol is present, it means that there is at least one alarm active. Pressing the HELP button, you directly go to the
active alarms page.
With the arrows you can select the menu. Once selected the desired menu, press the "i" button to confirm and enter or press
"menu" to return to the previous screen. Then you will see directly the parameters inside the selected menu or, if you select the
General setup, you will see a screen for the choice of the submenu. This screen is composed by 3 parts:
A) The name of the submenu
B) The icon of the submenu
C) The page and the icon of the menu that contains the submenu
Press "i" to confirm and enter, or press the left or right arrows to see the next submenu, or press "menu" to return to the previous
screen. In the submenus, the parameters are divided in different pages; choose the page with the left and right arrows, and choose
the parameter with the up and down arrows. Then press "i" to confirm and modify the parameter. An example of submenu is shown
in the following picture:
VERSO 50_v1.0.27_EN
A
B
C
D
A
B
33502027401_3_1
E) Alarms setup
F) EJPT setup
G) Counters setup
H) Measures setup
E
F
G
H
C
page 11/24