Setup Menu; Setting The Time And Date; Listen To Fm Radio - Fenton NASHVILLE Manual De Instrucciones

SETUP MENU

Navigating the setup menu
1. In FM or DAB mode, press MENU/INFO to enter the setup menu.
2. Rotate the TUNING knob to scroll to one of the available options.
3. Press the ENTER button to enter the chosen setup sub-menu.
DAB+ Setting menu
Full scan – This function alloys you to automatically scan and create a list of receivable DAB+ broadcasts.
Manual – This function can be used to obtain the optimum reception for a specific channel or frequency.
DRC (Dynamix Range Compression)
DRC can make quieter sounds easer to hear when the unit is used in a noisy environment. Rotate the TUNING knob to select
your desired DRC level: off, low, high.
Prune – Remove stations
Remove stations that are listed but unavailable. This function can remove all invalid stations indicated in the station list with a
''?'' in front of the station name.
System
Choose to select the system settings options: Sleep, Alarm, Time, Language, Factory Reset, Software Upgrade, Software
Version.
Sleep - Enter the sleep function.
Alarm - To adjust the alarm function.
Time - To adjust the time and date setting.
Language - To select the desired language of the unit's menu.
Factory Reset - To clear all users defined settings. When you enter factory reset mode, rotate the TUNING knob to select
''YES''. Press the ENTER button to confirm to restore to factory default settings. Select ''NO'' to cancel this selection.
SW Version - Displays the current software version.
FM Setting Menu
Scan Settings
Strong stations: The automatic search function only selects strong stations.
All stations: The automatic search selects any available station.
Audio Settings
To choose between '' Stereo or mono'' and ''forced mono'' for the FM radio.
System
Please refer to the DAB system setup mode.

SETTING THE TIME AND DATE

The first time you listen to DAB radio, the time and date of your product will be synchronized automatically to the DAB service,
so there is no need to set the time and date manually.
If you wish to set the time and date manually, turn on the radio and follow the steps as below:
1. Press and hold the MENU/INFO button in DAB or FM mode.
2. Rotate the TUNING knob to scroll to ''System''. Press the ENTER button to enter this option.
3. Rotate the TUNING knob to scroll to ''Time''. Press the ENTER button to enter this option.
''Set Time/Date'' is displayed, the hour digits will flash. Use the TUNING knob to set the hour. Press the ENTER button to
confirm the hours.
4. The minute digits will now flash. Use the TUNING knob to set the minutes. Press the ENTER button to confirm.
5. ''Set date'' is displayed and the day will flash. Use the TUNING knob and ENTER button to set the day, month and year.
6. Confirm the date. '' Time saved'' is displayed, the display returns to ''set/time/date''.
You can use the TUNING knob and ENTER button to setup the following:
SET TIME FORMAT: 12/24 hour clock display;
SET DATE FORMAT: DD-MM-YYY or MM-DD-YYY;
AUTO UPDATE: Auto update the time from the DAB signal, FM signal, Any (DAB or FM signal).

LISTEN TO FM RADIO

When the unit is on, press the MODE button until "FM" appears on the display to select the FM mode.
Manual search
Choose your radio station by turning the TUNING knob or pressing the ◄/► buttons.
Automatic search
Long press the ◄/► buttons, the radio will automatically search a previous/next station and stop at a station with strong enough
signal.
Preset stations
This unit can store up to 20 FM and 20 DAB/DAB+ stations.
1. Press MODE (repeatedly) to select FM or DAB/DAB+ mode.
2. Select a radio station.
3. Press and hold PRESET to enter the preset store mode.
4. Use the TUNING knob to select a channel slot.
5. Press ENTER to store the station. The selected station will be saved automatically after a few seconds if no further input is
registered. "Stored" will be displayed in either case.
6. Repeat step 1-5 to store other stations.
4