Unpacking Instruction - Fenton NASHVILLE Manual De Instrucciones

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OVERVIEW
1. CD/USB
2. Program
3. Repeat/Preset
4. Random/Alarm
5. USB Rec
6. Standby/On
7. Open/Close / Menu/Info
8. STOP/Scan/Snooze
9. ◄ Preset Stations -/Previous
10. Enter/Play
11. ► Preset Stations +/Next
12. Mode
13. Volume Control
14. Power On/Off
15. Headphones Jack
16. CD Player
17. LCD Display
18. AUX Input Jack
19. USB Port
20. Tuning Knob
21. FM Antenna
22. External Device Output Jack
23. DC IN
24. 45RPM Adapter
25. Lift Lever
26. Speed Selector (33/45/78)
27. AUTO STOP
28. Tone Arm Rest
29. Cartridge
30. Platter
OPERATION
1. Connect the record player with the power adapter and plug the other end into a wall power outlet.
2. Remove white protective needle cover by gently pulling towards the front of the unit.
3. Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to
the record.
4. Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge onto
the desired position of the record and the turntable player starts to play.
5. Turn the volume control knob clockwise to adjust the volume.
Noted: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control is
turned OFF, record will NOT stop automatically when finished.
3