TFA 60.2034. Serie Instrucciones De Uso página 16

TFA_No. 60.2034_Anleitung 25.05.2022
Digital alarm clock and night light
• The alarm will be interrupted for 5 minutes.
• Press any button (except SNOOZE/LIGHT) and the snooze function will stop.
11. Night light
• Press the SNOOZE/LIGHT button once in normal mode to switch on the night light (default: highest brightness
level). The night light symbol appears on the display.
• Press and hold the SNOOZE/LIGHT button to dim the night light continuously (10-100%).
• To switch off the night light press the SNOOZE/LIGHT button again. The night light symbol disappears.
• To activate the night light with timer function, press the SNOOZE/LIGHT button twice in quick succession in nor-
mal mode.
• AUTO OFF is indicated and the adjusted time duration appears briefly on the display. After time has expired, the
night light will switch off automatically (see "Setting AUTO OFF function for the night light").
• To deactivate the night light with timer function before it expires, press the SNOOZE/LIGHT button again twice in
quick succession.
• AUTO OFF disappears.
12. Troubleshooting
Problem Solution
➜ To switch on press and hold the + and – button at the same time
No display on the device
➜ Connect the device with USB cable and power adapter and charge the battery
➜ Check the connection
➜ Short-term activation of the display by touch or sound
➜ Permanent operation with USB-/mains connection only!
➜ Set the clock
Incorrect indication
13:59 Uhr Seite 16
– 30 –
Digital alarm clock and night light
➜ Factory reset: To reset to factory setting, press and hold the + and SET button at
the same time
➜ To activate the alarm function press the ALARM button in normal mode.
Alarm clock does not ring
SNOOZE/LIGHT sensor button ➜ Touch sensor button only briefly. Do not press too hard or leave your finger
doesn't react on the button. Wait some seconds and try it again.
If your device fails to work despite these measures, please contact the retailer where you purchased the product
from for advice.
13. Waste disposal
This product and its packaging have been manufactured using high-grade materials and components which can be
recycled and reused. This reduces waste and protects the environment.
Dispose of the packaging in an environmentally friendly manner using the collection systems that have been set
up.
Disposal of the electrical device
Caution! This device contains a built-in battery that cannot be removed without damaging the housing.
Improper removal represents a safety risk. Hand in the device unopened at the collection point; the
device and battery will be disposed of properly.
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive
(WEEE).
This product must not be disposed of in ordinary household waste. As a consumer, you are required to
take end-of-life devices to a designated collection point for the disposal of electrical and electronic
equipment, in order to ensure environmentally-compatible disposal. Observe the current regulations in
place!
– 31 –