Description Of Parts; How To Use The Appliance - Argo POLIFEMO DEDALO Manual Del Usuario

1. Control panel
2. Buttons on control panel
3. Air outlet
4. Dust filter and evaporative panel
The appliance does not need to be installed.
Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (220-240 V~): the
appliance can be switched on using the ON/OFF button and you will hear a sound.
When you move it, use the handle on the back. Do not use this cooler in an area with high humidity, rich in dust or with a
temperature above 40 °C.
This product can be used either as a fan, with 3 modes (Normal, Natural and Sleep) and 3 fan speed options (low,
medium and high), or as a cooler/humidifier: in this case the rear tank should be filled with
not exceeding the maximum level as indicated. When the water in the tank falls below the minimum level, marked on the
tank, LED Low water on control panel will flash to indicate the leak of water.
The fan takes in air from the room and passes it through the dust filter and the evaporative panel, which is constantly
humidified thanks to a system which draws water from the tank and sprays it onto the panel. The incoming hot air makes
part of the water contained in the panel evaporate and is therefore cooler when released back into the room, which makes
it feel as though the temperature has dropped.
V 12/20

DESCRIPTION OF PARTS

HOW TO USE THE APPLIANCE

5. Water tank
6. Multidirectional wheels
demineralized water, up to but
16