Connecting The Y/C (S-Video) Signal To The Monitor; Connecting The Ypbpr Signal To The Monitor; Connecting Audio To The Monitor; Operation - GE UltraView LCD 17 in Manual De Usuario

UltraView LCD 17 in./19 in. Monitor

Connecting the Y/C (S-Video) signal to the monitor

There is 1 set of mini-DIN type connectors for the Y/C (S-Video) input/output on the
rear side panel (see Figure 3 on page 9).

Connecting the YPbPr signal to the monitor

There is one set of YPbPr connectors for the S-Video (Y/C) input/output on the side
panel (see Figure 3 on page 9). Connect the signal cable to the connectors with same
colors (green/blue/red).

Connecting audio to the monitor

There are three sets of stereo audio connectors located on the bottom and side
panels (see Figure 2 on page 8 and Figure 3 on page 9) and one PC phone jack for
audio input located on the bottom panel (see Figure 2 on page 8).
• Audio 1 and Audio 2 are RCA input/output sets with loop-through function,
Audio 3 is RCA inputs with L/R channel.
• Audio 1 is associated with Video 1; Audio 2 is associated with Video 2, Y/C ;
Audio 3 is associated with YPbPr, and PC audio is associated with VGA, DVI.
Video signal
Video 1
Video 2
S-video
YPbPr
VGA
DVI

Operation

Selecting the input signal

Press the Mode button to scroll through these options onscreen.
VGA signal DVI signal
BNC Audio 1 BNC Audio 2
X
X
Composite
signal
Audio 3
X
X
S-VIDEO signal
13 • EN
PC Audio
X
X
YPbPr signal