Tools Needed For Assembly; Carton Contents - KNOVA KN SS-18VVS Instrucciones De Uso

TOOLS NEEDED FOR ASSEMBLY

SUPPLIED
3 mm hex key

CARTON CONTENTS

1. Carefully unpack the scroll saw
and all its parts, and compare
against the list below and
the illustration.
2. With the help of an assistant,
place the saw on a secure
surface and examine it carefully.
D. Side bracket
- lower supports
F. Front bracket
Slotted screwdriver
#2 Phillips screwdriver
WARNING
do not plug the power cord into a source of power during unpacking and
assembly. The cord must remain unplugged whenever you are adjusting/ assembling
the scroll saw.
• The scroll saw is heavy and should be lifted with care. If needed, get the
assistance of someone to lift and move the scroll saw.
• If any part is missing or damaged, do not attempt to assemble the scroll saw,
or plug in the power cord until the missing or damaged part is correctly replaced.
A. Scroll saw
assembly
E. Rear bracket
- upper & lower
supports
NOT SUPPLIED
• To avoid injury from unexpected starting or electrical shock,
B. Blade bag
- 5 in. pin-end blade
- 3 mm hex key
- upper & lower
supports
H. Stand leg
(front)
I. Stand leg
(rear)
5
Adjustable wrench
13 mm wrench
C. Side bracket
- Upper supports
G. Stand hardware bag