Eldom ribby HO110C Manual De Instrucciones página 14

INSTALLATION
1. Carefully place the device with its feet upwards (soft surface is best used to avoid damaging of the protection
coat).
2. Install the metal castor bases with clamps and nuts: pic. 2. The bases should be spaced as in pic. 1.
3. Set the castors in the installed bases and tighten with the enclosed nuts.
4. Turn the heater back to the proper vertical position.
CLEANING AND MAINTENANCE
• Disconnect the device from the power supply before cleaning.
• The device must not be immersed in water.
• Do not use cleaning agents and products that are strong or destructive to the surface.
• Wipe the enclosure with damp cloth.
PROTECTION OF THE ENVIRONMENT
• The device is made of materials that may be subjected to further processing or recycling.
• It should be handed over to the relevant point dealing with collection and recycling of electrical and electronic
devices.
GUARANTEE
• The device is intended for private household use.
• It may not be used for professional applications.
• The guarantee shall become void if the device is operated improperly.
14
PIC. 2