Product Characteristics - YATO YT-82770 Manual De Instrucciones

PRODUCT CHARACTERISTICS

A drill driver is a universal portable device that does not need any external source of power supply, intended for handymen for
making holes in various materials (e.g. wood and wood-related materials, metals), for screwing and unscrewing various screws
and bolts, and also for impact drilling in hard ceramic materials (e.g. concrete). Its particular advantages will be appreciated by
handymen performing various assembly and fi nishing works. This product is not designed for commercial applications. Correct,
reliable and safe operation of this power tool depends on proper operation, therefore:
Before starting the work with this tool, please read this manual and keep it properly.
The supplier does not assume any liability for damages resulting from failure to follow safety regulations and recommendations
specifi ed in this manual.
EQUIPMENT
The device is delivered complete and does not require assembly. This drill driver is supplied with: battery, charger.
TECHNICAL PARAMETERS
Parameter
Catalogue number
Operating voltage
Rotation (idle running)
Impact frequency
Max. torque
Noise level
- acoustic pressure L ± K
pA pA
- acoustic power L ± K
wA wA
Protection class
Insulation class
Oscillation level a ± K
h
Weight
Tool chuck
Maximum drilling diameter
- in wood
- in concrete
- in steel
Battery type
Battery capacity
Battery energy
Charger
Input voltage:
Mains frequency
Rated power
Output voltage:
Output current:
Charging time
GENERAL SAFETY CONDITIONS
NOTE! Get acquainted with all the instructions below. Failure to observe them may lead to an electric shock, fi re or injuries. The
notion of electric tool used in the instructions applies to all the tools which are powered with electric current, both wire tools and
wireless ones.
OBSERVE THE FOLLOWING INSTRUCTIONS
Place of work
The place of work must be properly illuminated and clean. Disorder and poor illumination may be a cause of accidents.
Do not work with electric tools in explosive environments, or those which contain infl ammable liquids, gases or vapours.
Electric tools generate sparks, which may cause a fi re in case of contact with infl ammable gases or vapours.
Do not allow children and outsiders to the place of work. A lack of concentration may result in a loss of control over the tool.
O R I G I N A L
GB
Measuring unit
[V]
[min ]
-1
[min ]
-1
[Nm]
[dB]
[dB]
[m/s ]
2
[kg]
[mm]
[mm]
[mm]
[Ah]
[Wh]
[V~]
[Hz]
[W]
[V]
[A]
[h]
I N S T R U C T I O N S
Value
YT-82770
18 DC
0 - 1850
0- 4800
2
83,0 ± 3,0 / 91,0 ± 3,0
94,0 ± 3,0 / 102,0 ± 3,0
IPX0
III
16,9 ± 1,5 / 15,9 ± 1,5
2,0
SDS+
40
18
13
Li-Ion
3
54
100 - 240
50 - 60
50
21 DC
1,5
1,5
13