Tabla de contenido
Idiomas disponibles
Idiomas disponibles
33813
REF.
21. The means for disconnection from the supply mains having a contact separation in all poles that
provides full disconnection that must be incorporated in the fixed wiring in accordance with the
wiring rules.
22. Regarding the instructions for the method of fixing and how to install the fan, thanks to refer to
the section "INSTALLATION".
23. Regarding the method of the cable connection, thanks to refer to the section "CABLE INFOR-
MATION".
24. Regarding the instructions for the bulb replacement included the model or type reference of a
luminaire,thanks to refer to the section "Bulb Replacement".
DESCRIPTION OF SYMBOLS
You will find all the symbols related to his lamp on both the product label and the box in which it
came.
Insulation class I
the earthing conductor.
Insulation class II
connection.
AC - Alternating Current Voltage
Frequency (hertz)
Voltage in volts
Intensity of current in watts
Minimum separation distance between the lamp and any flammable object in metres.
The exact distance can be found on the label of the lamp.
Do not use the lamp without the glass. If it is damaged, it must be replaced with a new one
The lamp is designed to use only self-protected tungsten halogen light bulbs.
Exclusive use in enclosed spaces.
IP Level of protection against intrusion. You can find the corresponding protection level on
the label of the lamp.
The luminaire can under no circumstances be mounted on normally flammable surfaces.
SWITCHING IT ON
Connect to the power supply and check the functioning of the fan. A series of pulses controls the
speed of the fan, as follows:
Press once - fast; press 2 times - medium speed; press 3 times - slow; press 4 times - off. The
speed adjustments to increase or reduce the temperature will depend on factors such as the size of
the room, its height, the number of fans available, etc. Using the sliding switch, you can control the
direction of the fan, forward or backward.
Hot temperatures/low position - (forward) The fan turns anti-clockwise. The downward air current
creates a cooling effect, as shown in figure A. This enables you to set the air conditioning to a
higher temperature without compromising on comfort.
Low temperatures/upper position - (backward) The fan turns clockwise. The upward air current
causes the warm air in the upper part of the room to move to other areas, as shown in figure B.
This enables you to set the heating to a lower temperature without compromising on comfort.
(Before using your fan in this position, consult point 10 of the safety instructions).
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
This fan must be connected with it's ground wire (green and yellow cable) to
This fan has double insulation and it must not be connected to the earth
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Tabla de contenido
