Charging The Battery; Before Use - SOLAC CP7370 Instrucciones De Uso

Use the device only with the ba-
•
ttery/ies for which has been spe-
cifically designed. The use of any
other battery/ies s can cause an
explosion or fire hazard.

CHARGING THE BATTERY:

Caution: a new battery is not fully
•
charged and must therefore be
charged before the appliance is
used for the first time.
Charge the battery at an atmos-
•
pheric temperature of between 4
and 40ºC.
Connect the charger to the jack •
using the socket on the appliance.
The socket is located at the lower/
back part of the appliance.
Plug the charger into the mains.
•
The pilot light will come on to indi-
•
cate that the charger is charging
the battery.
Approximately 2 to 3 hours are
•
needed for a complete charger of
the battery. Never attempt to over-
charge the battery (although it is
recommended that the first charge
of the battery be of 3 hours in du-
ration).
When the battery is charged dis-
•
connect the charger from the mains
supply.
HOW TO CHECK THE BATTERY'S
CHARGE LEVEL:
The load indicator will change the
•
colour when the appliance id com-
pletely charged.
NB: For a long battery life, it is ad-
•
visable to charge the battery, only
when it has run out completely.
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all products' packa-
•
ging has been removed.
Before using this product for the
•
first time, it is important to make a
full charge of batteries.
Insertion of a comb guide:
•
Fit the comb guide to the applian-
•
ce.
Grasp the comb guide by both ends
•
and tighten against the blades
To attach the comb guide, pick up
•
by its two tips and press against
the blades of the appliance until is
firmly fixes.
Hold the guide comb by the two
•
sides, insert the head into the gui-
des and slide downward until it is
coupled
Use the comb size selector to ad-
•
just the height of the cut.
To extract the comb guide, just pull
•
out.
EN