Protecting The Environment; Technical Data - Stanley FATMAX SFMCE001 Traducido De Las Instrucciones Originales

ENGLISH
The fan has three speeds and can be adjusted by the
u
.
control knob
Adjusting the fan angle (Fig. F)
Warning! Keep fingers away from the front and rear
grill of the fan.
This fan has a pivot dial (5) for maintaining multiple
u
angles.
To adjust the fan angle, loosen the pivot dial and gently
u
push or pull the fan handle (3).
Storage hook (Fig. G)
Warning! To reduce the risk of serious personal injury,
turn unit off and remove the battery pack before making
any adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Warning! To reduce the risk of serious personal injury, do not
use a damaged Track Wall integral hang hook or Trackwall. A
damaged Track Wall integral hang hook or Trackwall will not
support the weight of the tool.
Warning! To reduce the risk of serious personal injury, DO
NOT suspend tool overhead or suspend objects from the
integral hang hook. ONLY suspend tool on the Trackwall using
the integral hang hook.
Warning! The Track Wall integral hang hook is intended to
mount the tool onto a Trackwall rail. Do not use the integral
hang hook to mount the tool to any other surface.
Warning! The Track Wall integral hang hook is not
a belt hook.
Warning! When hanging objects on a Trackwall rail,
adequately space the tools in order to not exceed 75 lb (35
kg) per linear foot.
Warning! Before using the tool make sure that the Track Wall
integral hang hook is returned to its original position.
Flip or pull open the integral hang hook (4). It clicks when
u
locked into position.
Mount the integral hang hook to the Trackwall.
u
Note: Various trackwall hooks and storage configurations are
available.
Please visit our website www.stanley.eu/3 for further
information.
Suspending/mounting the fan (Fig. G)
Keyhole Slots
If using the keyhole slots (8), use at least 2 screws, one on
each side, secured into a sturdy surface.
Place the wide portion of the keyhole slot over the head of
u
the screw.
Slide the fan down until the screw is inside the narrow
u
portion of the keyhole and check to be sure the fan
is secure.
8
(Original instructions)
Carrying the Fan
Carry the fan using the fan handle ( 3 ).
u
Maintenance
Your Stanley FatMax tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
u
from the interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste..
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com

Technical data

V
Voltage
Weight Kg
This tool is a Bare unit but can be used with the chargers in
the following table.
Charger SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current A
This tool is a Bare unit but can be used with the batteries in
the following table.
SFMCB201
Battery
18
Voltage V
DC
1.5
Capacity
Ah
Li-Ion
Type
SFMCE001
DC
SFMCB12 SFMCB14
230 230
18 18
1.25 2
SFMCB202 SFMCB204 SFMCB206
18 18
2.0 4.0
Li-Ion Li-Ion
18V
2.0
230
18
4
18
6.0
Li-Ion