Premier CR-4823R Manual De Instrucciones página 17

3. Speed: Selects fan speed.
• Press to select desired fan speed: High – Medium – Low, in turn. LED panel will display the
corresponding air speed.
4. Cool: For cool air / humidify function.
• Press once to start the evaporative cooling function. COOL indicator light will illuminate and
LED panel displays the cool indicator.
• Press again to stop function and operate in regular fan mode.
• Make sure water is added before turning on this function. Unit cycles the water to blow cool,
humidified air.
• Add ice to the water tank or use the supplied cold storage for added cooling.
5. Timer: Sets timer-off in increment of 1 min.
• Timer can be set between 1min to
• TIMER indicator will illuminate and LED panel will display the set time.
• To remove timer and operate unit continuously, press button repeatedly until indicator light
and display goes off.
6. Oxygen Bar with Anion.
• Fan releases
• Operates automatically when unit is turned on.
NOTE: Water must be added to the water tank before using the COOL function.
• Open the front door by the pulling gently on the handle.
• Add water to the tank. Do not overfill.
• For added cooling,add ice to the tank or place the icebox in the tank and put cold storage along
the track.Icebox and cold-storage must be placed in the freezer for at least 1 hour before
use.(Fig.1)
• Power supply should be disconnected before filling to prevent electrical parts from damage.
P-6
positive ions into the air.
8 hours.
Fig 1