Premier CR-4823R Manual De Instrucciones página 15

Filter Handles
XX
(Fig 2)
Cleaning the Dust Filter
1. Disconnect the power supply.
2. Push down on the two handles of the filter and pull outwards. (Fig 2)
3. Clean under lake warm water and mild detergent.
4. Make sure filter is completely dry before operating unit.
Cleaning the Water Curtain
1. Disconnect the power supply.
2. Remove the 3 screws located on the back frame: one in each top corner and
one at bottom center. Do not remove back panel yet.
3. Panel is connected to the unit by a water tube, gently remove end of tube that is connected to
the water pump. (Fig. 3) Remove back panel.
4. Remove water curtain by first removing the bottom rod – push in gently. Then remove from top
rod by separating the Velcro attachment.
5. Wash water curtain in a mild detergent and warm water solution, then rinse in clean water. (Fig.
4)
6. Replace water curtain; make sure tube is firmly connected to the pump.
Storage
If you plan not to use the unit for a long period of time, drain the water tank and wipe clean. Clean
the filter and water curtain. Operate the unit in normal fan mode for approximately 30~60 minutes on
a sunny day. This will dry the interior and prevent mold from growing. It is recommended to pack the
unit in its original box and store in a dry, cool place
P-4
Fig. 8
Water Tube
(Fig3)
Fig. 9 Fig. 10
X
(Fig 4)
Fig 11