Intended Use; Safety Instructions - Black and Decker KS2005E Traducción De Las Instrucciones Originales

Intended use

Your Black & Decker jigsaw has been designed for sawing
wood, plastics and sheet metal. This tool is intended for
consumer use only.

Safety instructions

General power tool safety warnings
@
Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
All manuals and user guides at all-guides.com
3. Personal safety
a. Stay alert, watch what you are doing and use common
b. Use personal protective equipment. Always wear eye
c. Prevent unintentional starting. Ensure the switch is in
d. Remove any adjusting key or wrench before turning
e. Do not overreach. Keep proper footing and balance at
f. Dress properly. Do not wear loose clothing or
g. If devices are provided for the connection of dust
4. Power tool use and care
a. Do not force the power tool. Use the correct power
b. Do not use the power tool if the switch does not turn it
c. Disconnect the plug from the power source and/or the
d. Store idle power tools out of the reach of children and
e. Maintain power tools. Check for misalignment or
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
all times. This enables better control of the power tool in
unexpected situations.
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was designed.
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
ENGLISH
5