Tarjeta Wlan; Removing The Wlan Card - Dell OptiPlex 3000 Thin Client Manual De Servicio

Steps
1. Verify if the DIMM thermal pad is warpage. If yes, then press the pad to secure it properly to the system board.
2. Remove the blue film on the DIMM thermal pad.
3. Align the notch on the memory module with the tab on the memory-module slot.
4. Press down on the memory module until the memory module snaps into position and the securing clip locks in place.
NOTE: The securing clips return to the locked position. If you do not hear the click, remove the memory module and
reinstall it.
NOTE: Repeat step 1 to 2 when installing more than one memory module in your computer.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
Next steps
1. Install the side cover.
2. Follow the procedure in

Tarjeta WLAN

Removing the WLAN card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the removal procedure.
20 Extracción e instalación de componentes
after working inside your
before working inside your
computer.
computer.