The Child Lock Function - Amica PB2VI501FTB1 Serie Manual De Instrucciones

OPERATION
Booster function control
Depending on the model, the cooking zones are paired vertically or crosswise. Total power
is shared within the paired cooking zones..
If you attempt to enable the Booster function for both cooking zones simultaneously, the ma-
ximum power available would be exceeded. In that case the heat setting of the first activated
cooking zone will be reduced to the highest level available.
If activating Booster function causes the overall power limit of a pair to be
exceeded, the heat setting of the other cooking zone in a pair will be automa-
tically reduced.

The child lock function

The Child Lock function protects the appliance from inadvertent operation by children. The
appliance can be operated once the child lock function has been released.
Setting the child lock function
The child lock function can only be set when the appliance is switched on and none of the
cooking zones or timer is in operation (all displays show „0" and dots are a flashing).
To set the child lock function switch the appliance on using the on/off sensor field (1), simul-
taneously touch the right cooking zone selection sensor field (5) and „-" sensor field (4) and
once again touch the right cooking zone selection sensor field (5). All displays will show the
letter „L" (Locked), which indicates that the Child Lock function has been set. If cooking zones
are still hot, the display will alternate between showing the letters „L" and „H".
The Child Lock function must be set within 10 seconds and no sensor fields other
than those described above must be touched. Otherwise the Child Lock function
will not be set.
The Child Lock function remains set until it is released even after the appliance
has been switched off and then switched on again. Disconnecting the appliance
from electrical mains does not release the child lock.
Releasing the child lock function to cook only
Turn on the appliance using the on/off sensor field (1); all displays will show the letter „L" (Loc-
ked). To release the Child Lock function simultaneously touch the right cooking zone selection
sensor field (5) and „-" sensor field (4). The letters „L" shown on the cooking zone displays
will be replaced with „0." and a flashing dot. Cooking zones can now be operated. (For details
please see section „Selecting the cooking zone heat setting").
48