Prune Invalid - auna iTuner 320 BT Manual De Instrucciones

EN
62
DAB Display Modes
Every time you press the MENU/INFO button on the unit or INFO on the
remote control, the display will show the following display modes: DLS –
Programme Type – Ensemble/Frequency – Signal error/Strength – Bit rate/
Codec/Channels – Date
DLS (Dynamic Label Segment)
This is a scrolling message giving real-time information, e.g. song titles,
news headlines, etc.
Programme Type
This describes the "style" or "genre" of the programme that is being
broadcast.
Ensemble Name/Frequency
This display the name of the multiplex that contains the station you are
listening to and the frequency. A multiplex is a collection of radio stations
that are bundled and transmitted on one frequency. There are national and
local multiplexes. Local ones contain stations that are specific to that area.
Signal Error/ Signal Strength
The error is shown as a number. If the number is 0, it means the signal
received is error free and the signal strength is strong. If the error rate is
high, it is recommended to reposition the radio aerial or reposition the unit.
The display will show a slide bar to indicate the signal strength, the stronger
the signal, the longer the bar will be from left to right.
Bit Rate / Codec / Channels
The display will show the digital audio bit rate being received with
additional information about the audio codec and channel configuration.
Date
This displays the current date provided automatically by the broadcaster.

Prune Invalid

You may remove all unavailable stations from the list.
1. During DAB mode, press the MENU button and press the
buttons to select Prune invalid and then press the SELECT button to
confirm.
2. Press the
button to confirm, or select [NO] to cancel.
buttons to select [YES] and press the SELECT