TABLE OF CONTENTS
Rules for Safe Operation ........................................................................................................................ 2
Oil and Fuel ............................................................................................................................................ 3
Operating ............................................................................................................................................... 3
Maintenance .......................................................................................................................................... 3
Cleaning and Storage ............................................................................................................................ 4
Troubleshooting ..................................................................................................................................... 4
Specifi cations ........................................................................................................................................ 4
For service, call 1-800-800-7310 in the United States or 1-800-668-1238 in Canada to obtain a
list of authorized service dealers near you. For more details about your unit, visit our website at
www.yardmachines.com or www.yardmachines.ca.
DO NOT RETURN THE UNIT TO THE RETAILER. PROOF OF PURCHASE WILL BE REQUIRED FOR
WARRANTY SERVICE.
Service on this unit both within and after the warranty period should be performed only by an authorized
and approved service dealer.
All information, illustrations, and specifi cations in this manual are based on the latest product information
available at the time of printing. We reserve the right to make changes at any time without notice.
Copyright© 2010 MTD SOUTHWEST INC, All Rights Reserved.
SPARK ARRESTOR NOTE
NOTE: For users on U.S. Forest Land and in the states of California, Maine, Oregon and Washington.
All U.S. Forest Land and the state of California (Public Resources Codes 4442 and 4443), Oregon and
Washington require, by law that certain internal combustion engines operated on forest brush and/or grass-
covered areas be equipped with a spark arrestor, maintained in effective working order, or the engine be
constructed, equipped and maintained for the prevention of fi re. Check with your state or local authorities
for regulations pertaining to these requirements. Failure to follow these requirements could subject you to
liability or a fi ne. This unit is factory equipped with a spark arrestor. If it requires replacement, ask your
LOCAL SERVICE DEALER to install the Accessory Part #753-06418 Muffl er Assembly
RULES FOR SAFE OPERATION
CALIFORNIA PROPOSITION 65 WARNING
THE ENGINE EXHAUST FROM THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE
OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols,
and their explanations, deserve your careful attention and understanding. The safety warnings do not
by themselves eliminate any danger. The instructions or warnings they give are not substitutes for
proper accident prevention measures.
S
M
YMBOL
EANING
SAFETY ALERT:
Indicates danger, warning or caution. Attention is required in
order to avoid serious personal injury. May be used in conjunction with other symbols or
pictographs.
NOTE:
Advises of information or instructions vital to the operation or maintenance of the
equipment.
DANGER:
Failure to obey a safety warning will result in serious injury to yourself or to
others. Always follow the safety precautions to reduce the risk of fi re, electric shock and
personal injury.
WARNING:
Failure to obey a safety warning can result in injury to yourself and others.
Always follow the safety precautions to reduce the risk of fi re, electric shock and personal
injury.
CAUTION:
Failure to obey a safety warning may result in property damage or personal
injury to yourself or to others. Always follow the safety precautions to reduce the risk of
fi re, electric shock and personal injury.
• IMPORTANT SAFETY INSTRUCTIONS •
READ ALL INSTRUCTIONS BEFORE OPERATING
GENERAL SAFETY
WARNING:
When using the unit, all safety rules must be followed. Please read these
instructions before operating the unit in order to ensure the safety of the operator and any
bystanders. Please keep these instructions for later use.
Read the instructions carefully. Be familiar with the controls and proper use of the unit.
•
Keep these instructions. Refer to them often and use them to instruct other users. If loaning this
•
unit to others, also loan them these instructions.
Do not operate this unit when tired, ill or under the infl uence of alcohol, drugs or medication.
•
Children and teens under the age of 15 must not use the unit, except teens guided by an adult.
•
Use the right tool. Only use this tool for its intended purpose.
•
Use the unit only in daylight or good artifi cial light.
•
Wear safety glasses or goggles that meet ANSI Z87.1 standards and are marked as such. Wear
•
ear/hearing protection when operating this unit. Wear a face or dust mask if the operation is dusty.
Wear heavy long pants, boots, gloves and a long sleeve shirt. Do not wear loose clothing, jewelry,
•
short pants, sandals or go barefoot. Secure hair above shoulder level.
Inspect the unit before use. Replace damaged parts. Make sure all fasteners are in place and
•
secure. Replace parts that are cracked, chipped or damaged in any way. Do not operate the unit
with loose or damaged parts.
All guards and safety attachments must be installed properly before operating the unit.
•
Use only manufacturers recommended replacement parts or accessories for this unit. Use of
•
any replacement parts or accessories purchased elsewhere may be hazardous, and will void the
warranty.
Be aware of risk of injury to the head, hands and feet.
•
Clear the area of children, bystanders and pets; keep them outside a 50-foot (15 m) radius, at a
•
minimum. Even then, they are still at risk from thrown objects. Encourage bystanders to wear eye
protection. If approached, stop the unit immediately.
Carefully inspect the area before starting the unit. Remove all debris such as rocks, broken glass,
•
nails, wire, string and other objects which may be thrown or become entangled in the unit.
Squeeze the throttle control and check that it returns automatically to the idle position. Make all
•
adjustments or repairs before using the unit.
Always stop the unit when operation is delayed or when walking from one location to another.
•
Always hold the unit with both hands when operating. Keep a fi rm grip on both handles or grips.
•
Do not force the unit. It will do the job better and with less likelihood of injury at a rate for which it
•
was designed.
•
Do not overreach or use from unstable surfaces such as ladders, trees, steep slopes, rooftops,
etc. Always keep proper footing and balance.
Do not operate the unit faster than the speed needed to do the job. Do not run the unit at high
•
speed when not in use.
If the unit strikes or becomes entangled with a foreign object, stop the unit immediately and
•
check for damage. Do not operate before repairing damage. Do not operate the unit with loose or
damaged parts.
Keep unit clean of vegetation and other materials that may clog, gum or bind moving parts, which
•
may cause serious personal injury and or damage to the unit.
Keep hands, face, and feet away from all moving parts. Do not touch or try to stop any moving
•
parts while they are in motion.
Allow the unit to cool before storing or transporting. Be sure to secure the unit while transporting.
•
Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean and free from
•
debris. Clean after each use, see Cleaning and Storage instructions.
Store the unit in a dry place, secured or at a height to prevent unauthorized use or damage. Keep
•
out of the reach of children.
2
WARNING
RULES FOR SAFE OPERATION
OIL AND FUEL SAFETY
WARNING:
Gasoline is highly fl ammable and its vapors can explode if ignited. Take
the following precautions:
Store fuel only in containers specifi cally designed and approved for the storage of such materials.
•
Always stop the engine and allow it to cool before fi lling the fuel tank. Never remove the fuel tank
•
cap or add fuel when the engine is hot. Never operate the unit without the fuel cap securely in
place.
Always mix or add fuel in a clean, well-ventilated outdoor area where there are no sparks or
•
fl ames. Do not smoke.
Never operate the unit without the fuel cap securely in place.
•
Avoid creating a source of ignition for spilled fuel. Wipe up any spilled fuel from the unit
•
immediately before starting the unit. Move the unit at least 30 feet (9.1 m) from the fueling source
and site before starting the unit. Do not smoke.
Never start or run the unit inside a closed room or building. Breathing exhaust fumes can be fatal.
•
Operate this unit only in a well-ventilated outdoor area.
Check the unit for fuel leaks.
•
•
Loosen the fuel tank cap slowly to relieve any pressure in the tank.
•
Never store the unit with fuel in the tank, inside a building where fumes may reach an open fl ame
(pilot lights, etc.) or sparks (switches, electrical motors, etc.).
To reduce fi re hazard, replace a faulty muffl er and spark arrestor. Keep the engine and muffl er free
•
from grass, leaves, excessive grease or carbon build up.
Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The
•
operator and unit must be in a stable position while starting.
Do not touch the engine, gear housing or muffl er. These parts get extremely hot from operation,
•
even after the unit is turned off.
Turn the engine to off and disconnect the spark plug for maintenance or repair.
•
TRIMMER SAFETY
The trimmer attachment shield must always be in place while operating the unit. Do not operate
•
unit without both trimming lines extended, and the proper line installed. Do not extend the
trimming line beyond the length of the shield.
•
Adjust the D-handle that provides the best possible grip.
•
Be sure the trimmer attachment is not in contact with anything before starting the unit.
•
Use only 0.080 in. (2.03 mm) diameter replacement line. Never use metal-reinforced line, wire,
chain or rope. These can break off and become dangerous projectiles.
Keep unit clean of vegetation and other materials. They may become lodged between the trimmer
•
attachment and shield.
Keep hands, face, and feet away from all moving parts. Do not touch or try to stop the trimmer
•
attachment when it rotates.
SAVE THESE INSTRUCTIONS
• SAFETY & INTERNATIONAL SYMBOLS •
This operator's manual describes safety and international symbols and pictographs that may
appear on this product. Read the operator's manual for complete safety, assembly, operating and
maintenance and repair information.
S
M
YMBOL
EANING
• SAFETY ALERT SYMBOL
Indicates danger, warning or caution. May be used in conjunction with other
symbols or pictographs.
• READ OPERATOR'S MANUAL
WARNING:
Read the operator's manual(s) and follow all warnings and safety
instructions. Failure to do so can result in serious injury to the operator and/or
bystanders.
• WEAR EYE AND HEARING PROTECTION
WARNING:
Thrown objects and loud noise can cause severe eye injury and hearing
loss. Wear eye protection meeting ANSI Z87.1-1989 standards and ear protection when
operating this unit. Use a full face shield when needed.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel
• DO NOT USE E85 FUEL IN THIS UNIT
WARNING:
It has been proven that fuel containing greater than 10% ethanol
will likely damage this engine and void the warranty.
• ON/OFF CONTROL
ON / START / RUN
• ON/OFF CONTROL
OFF or STOP
• OIL
Refer to operator's manual for the proper type of oil.
• PRIMER BULB
Push primer bulb, fully and slowly, 10 times.
• CHOKE CONTROL
1. • FULL choke position
2. • PARTIAL choke position
3. • RUN choke position
• THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY
WARNING:
Small objects can be propelled at high speed, causing injury. Keep
away from the rotating rotor.
• KEEP BYSTANDERS AWAY
WARNING:
Keep all bystanders, especially children and pets, at least 50 feet
(15 m) from the operating area.
• HOT SURFACE
WARNING:
Do not touch any metal engine components. The engine gets
extremely hot from operation and may cause severe burns. Allow the unit to
completely cool prior to any maintenance or servicing.
• SHARP BLADE
WARNING:
Sharp blade on cutting attachment shield. To prevent serious
injury, do not touch the line cutting blade.
IMAGES MAY OR MAY NOT RESEMBLE ACTUAL PRODUCT.