Konica Minolta magicolor 4695MF Guia De Informacion página 4

●Special Notice to User
- For Canada
NOTICE:
This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number is an
indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the
devices does not exceed five.
AVIS:
Le present materiel est conforme aux specifications techniques applicables d'Industrie Canada.
L'indice d'equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de terminaux qui peuvent etre raccordes a
une interface telephonique. La terminaison d'une interface peut consister en une combinaison quelconque de dispositifs, a
la seule condition que la somme d'indices d'equivalence de la sonnerie de tous les dispositifs n'excede pas 5.
- For U.S.A.
FCC PART 68 REQUIREMENTS:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the cover of this
equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If
required, this information must be provided to the telephone company.
This equipment uses certification jack USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation guide for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local
telephone company For products approved after July 23, 2001, the REN for this product is part of the product identifier
that has the format US: US:AAAEQ##TXXXX.. The digits represented by ## are the REN without a decimal point (e.g., 03
is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If magicolor 4695MF causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will
notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
If trouble is experienced with magicolor 4695MF, for repair or warranty information, please contact the Konica Minolta
dealer location where you purchased this equipment. If the equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service
commission or corporation commission for information. If your home has specially wired alarm equipment connected to
the telephone line, ensure the installation of magicolor 4695MF does not disable you alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic
device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification
of the business or other entity, or other individual sending the message and the telephone number of the sending machine
or such business, other entity, or individual.
(The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-
distance transmission charges.)
All manuals and user guides at all-guides.com
WARNING/CAUTION Explained
WARNING
The exclamation point within an equilateral triangle fol
possibility that a disregard for the warning may result
attention on the Warning headings when reading the U
CAUTION
The exclamation point within an equilateral triangle fol
possibility that a disregard for the caution may result in
attention on the Caution headings when reading the U
- For New Zealand
1. This device is equipped with pulse dialing while th
guarantee that Telecom lines will always continue
2. This equipment does not fully meet Telecom's imp
when used in conjunction with some parts of the n
difficulties arise in such circumstances.
3. The grant of a Telepermit for any item of terminal
the item complies with minimum conditions for con
product by Telecom, nor does it provide any sort o
item will work correctly in all respects with another
model, nor does it imply that any product is compa
4. The automatic calling functions of this equipment
5. Telepermitted equipment only may be connected
specifically designed for 3-wire connected equipm
connected to this port.
6. FAX Reception Operation (RX SETTING)- "No. of
- For Europe
The Facsimile has been approved in accordance with
terminal connection to the public switched telephone n
individual PSTNs provided in different countries, the a
successful operation on every PSTN network terminal
In the event of problems, you should contact your equ
3