Operating Elements And Status Indicators; Mounting; Electrical Installation - SICK WL12G-3P3572S12 Manual De Instrucciones

4

Operating elements and status indicators

5

Mounting

6

Electrical installation

8027339/1D6C/2021-11-19 | SICK
Subject to change without notice
OPERATING ELEMENTS AND STATUS INDICATORS
2 3
6
LED yellow: status of received light beam
2
LED green: supply voltage active, teach-in mode I
3
Blue LED: supply voltage active, teach-in mode II
LED light blue: supply voltage active, teach-in mode III
Teach-in button
6
Function 1: teach-in sensitivity on reflector
Function 2: operation/teach-in mode changeover
Mount the sensor and the reflector using suitable mounting brackets (see the SICK
range of accessories). Align the sensor and reflector with each other.
The sensors must be connected in a voltage-free state. The following information must
be observed, depending on the connection type:
– Male connector connection: pin assignment
Only apply voltage and switch on the voltage supply once all electrical connections have
been established.
Explanation of the connection terminology used in the following tables:
BN = brown
WH = white
BU = blue
BK = black
Q = switching output
L+ = supply voltage (U )
V
M = weight
DC: 10 ... 30 V DC, see „Technical data"
Table 4: Pin assignment
PIN
1 = BN
Pin assignment
+ (L+)
O P E R A T I N G I N S T R U C T I O N S | WL12G-3P3572S12
4
en
17