Cleaning Interior, Exterior, and Door
To avoid electrical shock which can cause severe
personal injury or death,unplug power cord or open
circuit breaker to oven before cleaning.
Clean microwave oven with mild detergent in warm
water using soft sponge or cloth. Wring sponge or cloth
to remove excess water before wiping equipment. If
desired, boil a cup of water in microwave oven to loosen
soil before cleaning.
• Do not use abrasive cleansers or cleaners containing
ammonia. These could damage finish.
• Never pour water into microwave oven bottom.
• Do not use water pressure type cleaning systems.
All manuals and user guides at all-guides.com
Warning
Cleaning Splatter Shield
To avoid oven cavity damage, do not operate oven
without splatter shied in place. Arcing will damage
oven cavity, support bar, and stirrer blade when
operated without shield in place.
Splatter shield keeps top of microwave oven cavity and
antenna from becoming soiled. Clean soil from shield
with damp cloth or clean with mild detergent and water.
Remove splatter shield for easy cleaning.
1. Unplug oven before removing splatter shield to stop
antenna from rotating.
2. Place fingers on front of shield, push forward, and
down.
• When removing and replacing splatter shield,
be careful not to bend antenna.
3. Wash shield in hot, soapy water. Rinse and
dry thoroughly.
• Do not wash splatter shield in dishwasher.
• Do not use abrasive cleaners.
4. Reinstall splatter shield by fitting tabs into slots
at top of oven cavity back. Lift and press front
of shield until shield snaps into place.
14
Caution