4
Cleaning and maintenance
4.2 Cleaning the filters
After each 5 dust bag replacement (may vary de-
pending on the frequency and area of usage) cle-
an the filters.
A
WARNING: Do not use appliances
producing hot air such as hair dryer
or heater to dry the filters.
WARNING: Do not install the
filters without completely drying
A
them; otherwise smell of moisture
may occur during the use, water can
leak from the back of the appliance
or the filters may get damaged.
A
WARNING: When the filters dry,
replace them into their positions.
4.2.1 Motor protection filter
1. Open the cover by pressing the fron cover
release latch (7).
2. Remove the dust bag together with the dust
bag holder.
3. Remove the foam from the grid.
4. Wash it under running water after shaking it
off.
5. After washing the foam, gently wring it and le-
ave it to dry.
10 / 79 EN
All manuals and user guides at all-guides.com
4.2.2 Foam filter
1. Open the rear cover.
2. Remove the foam filter behind the cover and
3. After washing the foam, gently wring it and le-
4.3 Storage
• If you do not intend to use the appliance for a
• Pull the appliance' s plug out.
• Keep the appliance out of the reach of children.
Rear cover
wash it.
ave it to dry.
long time, store it carefully.
Vacuum Cleaner / User Manual