Tabla de contenido
Reading the barometric pressure for the last 12 hours
Press the HISTORY button
last 12 hours.
0HR = present barometric pressure
–1HR = barometric pressure an hour earlier
–2HR = barometric pressure two hours earlier, etc.
Press and hold down the HISTORY button for about 3 seconds to switch between
displaying the barometric pressure units in inHg or mb / hPa.
Setting the channel
The weather station receives the outdoor sensor signal automatically after you have
made all the settings. The symbol for humidity (outdoor)
ture
flashes during this time.
25
Note: If you use more than one outdoor sensor (max. 3), you can receive data at
the weather station from all the individual outdoor sensors. Select a different channel
for each outdoor sensor by pressing the channel button
in the LC display.
- 1: Outdoor sensor channel 1
- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
- : automatic channel change
to read the barometric pressure values for the
38
Operation
and outdoor tempera-
22
. The relevant data is shown
37
GB/MT
165
Tabla de contenido
