Display Menu; Disp Ay Menu Basic Settings; Language; Require Password - urmet domus 1093/064 Guía Rápida

2.1

DISPLAY MENU

Description
Access this menu to screen settings.
Position the "Active Frame" on the "DISPLAY" icon and press "ENTER".
The following window will appear:
This page contains the basic menu settings.
Select "SETUP" and press "ENTER" to access advanced settings.
The selected item is highlighted.
Press arrows "◄►" to point the cursor to the various menu items.
Select "CONFIRM" and press "ENTER" to make the changes effective.
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ESC" to go back by one step.
Press "ESC" several times until the configuration window closes to quit the configuration menu.
2.1.1 DISPLAY MENU BASIC SETTINGS
2.1.1.1

Language

Use "▲▼" to select the language in this menu.
2.1.1.2

Require password

This option can be used to enable or disenable password request for the following functions:
Menu
This function enables/disenables password request when the configuration menu is accessed.
Power off (with the
This function is used to enable/disenable password request for direct DVR switch-off.
PLAYBACK
This function en ables/disenables password request when playback is started/stopped.
RECORDING
This function en ables/disenables password request when recording is started/stopped.
PTZ
This function enables/disenables password request when the PTZ menu is accessed.
Press "ENTER" or "EDIT" to enable or disenable the password.
Symbol " " indicates that a password is required; symbol "×" indicates that a password is not required. The password is enabled
by default.
IMP RT O ANT NOTE
•
THE DEFAULT PASSWORD IS "12345".
•
It is advisable to change the default password to prevent intrusions.
•
To enter/edit the password, remember to press "SHIFT" (make sure that the STATUS LED lights up) followed
by the number keys. At the end of the operation, press "SHIFT" to go back to default functions. The STATUS
LED will go out.
•
Do not lose or forget the programmed password.
•
Take note of the new password and keep it in a safe place.
•
It will not be possible to access the device in local mode (i.e. using the front panel) if an alphanumeric
password is chosen (using the dedicated software).
2.1.1.3

Video standard

This option can be used to select the video format.
Use "▲▼" to select. Possible selections are "NTSC" and "PAL".
DS1093-013
All manuals and user guides at all-guides.com
Figure 24: display menu (basic settings)
button)
35