Hoover HL 1854 DX Manual De Instrucciones página 13

EN
INSTALLATION
WARNING! The appliance is heavy. Always handle with at least two persons.
Before first use
Ø Remove all packaging materials.
Ø Clean the appliance with water and a mild detergent and dry it with soft
cloth.
Ø Check if power supply, socket and fusing are appropriate to the rating
plate.
Ø Check if the power socket is earthed and no multi-plug or extension is
present.
Ø Check if the power plug is accessible after the appliance has been
positioned.
Ø Refrigerator and freezer temperature are automatically set at 4°C and -
18°C respectively. These are the recommended settings. If desired, you
can change these temperature manually. See Adjust the temperature.
Environmental conditions
Ø This appliance should be installed in a room that is dry and well
ventilated.
Ø Do not install the appliance near other heat-emitting appliances (ovens,
refrigerators) without isolation or exposed to direct sunlight.
Ø If this appliance is situated in a cold environment (such as a shed,
outhouse or garage), the performance will be affected and this may
damage the food.
Install this product in a position where the ambient temperature is not lower or higher
than the operating temperature: in this case the appliance does not work properly.
Extended temperate (SN): 'this refrigerating appliance is intended to be used at ambient
·
temperatures ranging from 10 °C to 32 °C'.
Temperate (N): 'this refrigerating appliance is intended to be used at ambient
·
temperatures ranging from 16 °C to 32 °C'.
Subtropical (ST): 'this refrigerating appliance is intended to be used at ambient
·
temperatures ranging from 16 °C to 38 °C'.
Tropical (T): 'this refrigerating appliance is intended to be used at ambient temperatures
·
ranging from 16 °C to 43 °C'.
Levelling the appliance
The appliance should be placed on a flat and solid surface