Features; Product Specifications; Assembly - Ryobi P555 Manual Del Operador

PRODUCT SPECIFICATIONS

Cutting Wheel/Blade Diameter ...............................3-3/8 in.
Cutting Depth .......................................................... 0.98 in.
Arbor Size .............................................................. 19/32 in.
No Load Speed ....................................... 4,250 /min (RPM)
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to the
product by the manufacturer and require customer instal-
lation. Use of a product that may have been improperly
assembled could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.

FEATURES

Maximum Wheel/Blade Thickness .......................... 1/25 in.
Wheel/Blade Type ...................................... Carbide (Wood),

ASSEMBLY

WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
SELECTING CUTTING WHEEL/BLADE
Selecting the correct type of wheel/blade is important in
order to obtain the best performance from the saw. Select
the wheel/blade based on the application and on the material
you wish to cut. Selecting the right wheel/blade will give you
a smoother, faster cut and prolong the life of the wheel/blade.
The best of cutting wheels/blades will not cut efficiently if
they are not kept clean, sharp, and properly set. Using a dull
wheel/blade will place a heavy load on the saw and increase
the danger of kickback. Keep extra wheels/blades on hand,
so that sharp wheels/blades are always available.
Always carefully select and use cutting wheels/blades that
are recommended for the material being cut. Make sure that
the minimum operating speed of any accessory wheel/blade
selected is 4,780 /min. or more.
WARNING:
Never use grinding wheels of any kind with this saw. Use
of non cutting wheels can result in property damage or
serious personal injury.
6 - English
HSS (Metal), Diamond (Tile)