Message Alert Tone; Message Recording Time - Amplicomms PowerTel 1780 Manual De Instrucciones

Message alert tone

When this feature is on, the base unit beeps every 10
seconds when there are new messages on the answering
machine. The alert tone is only heard on the base unit. Press
any key (except Paging and Boost) to switch the alert off for
the current message only. The alert will sound again for the
next new message.
1. In idle state press the menu key
2. Select Answering system and press
3. Select Ans sys setup and press
4. Select Msg alert tone and press
5. Select On or Off and press

Message recording time

You can set the recording time allowed for incoming
messages (1 minute, 2 minutes or 3 minutes).
1. In idle state press the menu key
2. Select Answering system and press
3. Select Ans sys setup and press
4. Select Recording time and press
5. Select an entry from the list and press
Helpline 0844 800 6503 (See page 35 for costs and hours of operation)
.
.
.
.
.
.
.
.
.
.
33