5.6 Maintenance Menu
To access the menu, with the washer extractor turned
on and stopped, press the INC and DEC (,) keys at
the same time for 3 seconds. With self-service washer
extractors, it is first necessary to open the lock in the
top cover, as this enables access to the menus. The
screen displays the CONF (Configuration) menu.
Use the INC & DEC (,) keys to select the MANT
option and press START.
5.6.1
In/Out (Inputs/Outputs)
This allows you to view the status of the different
inputs (IN) and outputs (OUT) of the base plate. The
OUT submenu also allows you to activate or
deactivate the plate outputs, including the water inputs,
the heating system or the inverter.
5.6.2
The statistics submenu contains data about the
machine's operation. The statistics available to the
user are as follows:
-
CiCL: Provides information about how many
times each program has been run.
-
HOUr: Gives the number of hours during
which the washer extractor has been running.
-
Err: Number of times each of the errors has
occurred (see section 6.2).
Std (Statistics)
-
SPd: Information about the number of times
each spin type has been run.
This is only available to the technical service.
This displays the last ten errors occurred in order.
5.7 Menu Mod
This is only available to the technical service
5.8 Machine operating
When the machine is running a program, the
Configuration menu is disabled, and the user is offered
certain data about the machine's operation. This data
is only displayed if the machine is set to OPL mode
(see section 5.4.1).
To go to the menu and view the real data while the
machine is running, press INC and DEC (,) together
for 3 seconds.
The following options will be available:
PArA (Parameters): Temperature, water level and time
remaining.
In (Inputs): This is only available to the technical
service.
Out (Outputs): This is only available to the technical
service.
19
5.6.3
Def
5.6.4
Last