Cp Mode; Credit Mode; Configuration Menu; Pric (Price) - ADC EcoWash EWH-25 M Manual De Uso Y Mantenimiento

the left-hand lock of the top cover and turn.
After turning the key, go to the CONF menu and then
to the PAY submenu (see section 5.5.8). In this menu,
select the COIN option using the INC and DEC keys
(,) and press START.
5.4.3
The CP Mode is also used in self-service machines,
but in this case, the machine is operated using a pay
station or card. As with the Coin Mode, the user is only
able to select and start the program.
To ensure the machine in CP Mode, insert a key in the
left-hand lock of the top cover and turn.
After turning the key, go to the CONF menu and then
to the PAY submenu (see section 5.5.8). In this menu,
select the CP option using the INC and DEC keys
(,) and press START.
5.4.4
When the machine is configured to Coin Mode or CP
Mode, the owner can choose to access certain
additional options that will allow them to modify certain
parameters. To do so, enter Credit Mode.
To enter CREDIT Mode, insert a key in the left-hand
lock of the top cover and turn. Then press and hold the
upper left key for 3 seconds. A short buzz is heard.
To exit CREDIT MODE, turn the key in the other
direction to close the lock and remove the key.

5.5 Configuration Menu

To access the menu, with the washer extractor turned
on and stopped, press the INC and DEC (,) keys at
the same time for 3 seconds. With self-service washer
extractors, it is first necessary to open the lock in the
top cover, as this enables access to the menus. The
screen displays the CONF (Configuration) menu.
Use the INC and DEC (,) keys to scroll through the
different available options in the menus. To go to the
required option, press START, and to go back, press
ESC (bottom left button).
On entering the CONF menu, different submenus are
available which permit the modification of some of the
parameters of the wash programs. These submenus
are not always available. Access to the menus will

CP Mode

Credit Mode

depend on the current operating mode (OPL MODE,
COIN MODE or CP MODE) of the washer extractor.
5.5.1
This allows the price of each program to be
established independently. It is only available in COIN
MODE (see section 5.4.2).
Use the INC & DEC (,) keys to select the program
for which the price is to be changed. Press START to
enter the program, and select the price using the INC
& DEC (,) keys; press START to confirm the price.
The price is conditioned by the currency selected; if
the currency is changed, the prices will be reset,
therefore it is IMPORTANT to select the currency first
(see section 5.5.6).
5.5.2

LEuL (Configuration of levels)

The water levels can be varied; there are three
different settings:
1- Low (factory setting)
2- Intermediate
3- High
If the configuration is modified, this will affect all the
levels of water used. Press start and the current level
is displayed (Leu1), use the INC and DEC (,) keys
to change the level to suit your needs. Press Start
again to confirm the level selected.
5.5.3

StCL (Configuration of standard cycles)

This submenu allows you to change the length of the
different wash cycles. The standard programs are P1,
P2, P3 and P4, therefore the changes made using this
submenu will apply to these programs, but not to P5,
P6 and P7.
16

PRIC (Price)