Terraillon POWER STEPPER Manual De Instrucciones página 20

INSTRUCTION FOR USE
STEPS TO CONNECT THE ADAPTOR
• Insert the adaptor tip into the rear socket of the device. (Hold the main unit firmly when inserting the tip into the adapter socket).
• Insert the adaptor into the nearest power supply socket. Make sure the power voltage is appropriate.
CAUTION:
• Please use the original adaptor. The user cannot assemble or change the specification of the adaptor. Personal injury or damage to the
unit may occur if you do not follow above instructions.
• Always place the device Power Stepper on the floor where is easy unplug it at any time.
CHECK/REPLACE THE BATTERY (NOT INCLUDED)
For the convenience, the device is designed with battery power supply.
• Open the battery compartment cover.
• Insert 4 batteries (type C) into the battery compartment, respecting the polarities (the polarities are indicated inside the battery
compartment).
• Close the battery compartment cover.
• Do the same with remote control (3 x AAA).
CAUTION:
• When connecting from the mains plug, the device will cut off the internal batteries supply automatically.
• Remove the batteries if the device does not work for a long time.
• Do not mix old and new batteries or different types of batteries.
• Warning: If batteries leak and touch your skin or get into your eyes, wash with large amounts of water immediately.
• Keep batteries out of reach of children.
• Do not use rechargeable batteries. Remove exhausted batteries from the unit.
20
EN
POWER STEPPER - INSTRUCTION MANUAL
ADAPTER
DC 6V/0.3A