Maintenance Table; Maintenance Procedures; Storage - SDMO PERFORM Serie Manual De Funcionamiento

5.2. Maintenance table

Operations to be carried
Component
deadline is reached first
Fixings
Engine oil
Gas pipes
Relief valve
Air filter
Spark arrester
Spark plug
Generating set
Valves *
Combustion
chamber *
* Operation(s) must only be carried out by one of our agents.
** The pipe between the relief valve and the engine must only be replaced by one of our agents.
The air filter must be cleaned more frequently if the generating set is being used in a dusty environment.

6. Maintenance procedures

Refer to the Generating set user and general maintenance manual.

7. Storage


Close the gas cylinder tap (if fitted).

Disconnect the gas cylinder from the generating set.

Follow the generating set storage procedure (see Generating set user and maintenance manual).
Each time it is
out at whichever
Check
Check the level
Drain and fill
Replace**
Replace**
Check
Clean
Replace
Check
Clean
Check / Clean
Clean
Have it checked*
Have it checked*
Every
year
or
used
Every 50
hours
●
●
According to the expiry date indicated on the pipes**
●
●
●
Every Every
year year
or or
75 hours 150 hours
●
●
●
●
●
●*
●*
Every
3 years
or
2000 hours
●*