Switching The Heater On And Off Via Wifi - Blumfeldt Heatbell Smart Ceiling Manual De Instrucciones

EN
18
Using the remote control
• Insert the power plug into the power
outlet.
• Set the power switch of the unit to the
"ON" position.
• To use the heater, press the ON/OFF
button on the remote control. Press the
MAX, MED or MIN buttons to adjust the
heater power.
• To turn the unit off, press the ON/OFF
button on the remote control again. If the
unit will not be used for a long period of
time, set the power switch to the "OFF"
position and unplug the power cord from
the wall outlet.

SWITCHING THE HEATER ON AND OFF VIA WIFI

• Make sure that the WLAN is available at the installation site of the device.
• Insert the power plug into the power outlet.
• Press and hold the POWER SETTING button until the LED light flashes
quickly.
• Open the WiFi app on your smartphone to connect the heater. Once the
heater is connected, you will hear a tone and the LED will stay on.
• The heater can now be controlled from your smartphone.