Setting The Off-Timer; Cleaning And Care - Blumfeldt Heat Guard Reflex Manual De Instrucciones

Setting the off-timer

• Point the remote control to the receiver and press the key "1", 1-hour
delay-off timer is activated. The heater will stop heat after 1 hour, and
reverts to standby mode, the heating indicator light will flash
• In the same way, you can set the timer to 2, 4, 6 to a maximum of 13 hours
by selecting several hour buttons simultaneously. The pressed hour values
are added.

CLEANING AND CARE

• Before cleaning, remove the plug from the socket and allow the unit to
cool completely.
• Do not use scouring agents or solvents for cleaning and never immerse the
unit in water.
• Clean the outside with a soft, damp cloth.
• The device contains parts that are not accessible to the user. Repairs may
only be carried out by qualified specialists.
EN
21