VALBERG WF 712 D W701T Instrucciones De Uso página 10

B
• Your washing machine requires a mains power supply of 220-240 V, 50 Hz.
• The power cord of your washing machine is fitted with an earthed plug. This plug should
always be inserted into a 10 amp earthed outlet.
• This plug should always be inserted into a 10 amp earthed outlet. The fuse rating of the
outlet must also be 10 amps.
• If the plug or fuse does not meet these requirements, call a qualified electrician.
• We disclaim all liability for any damage resulting from the use of unearthed facilities.
NOTE
Using the machine at low voltage will shorten its
lifetime and it will not perform as well.
Connecting the water inlet hose
 Depending on its technical specifications, your machine can be fitted with either a single
water inlet hose connection (cold water) or a double connection (hot and cold water). The
hose with a white cap should be connected to the cold water inlet and the hose with a red
cap to the hot water inlet (if applicable).
• To prevent water leaking from the joints, 1 or 2 nuts (depending on the technical
specifications of your machine) are delivered in the hose packaging. Fit these nuts to
the end of the water inlet pipe(s) to be connected to the water supply.
Using the appliance
1
3
7 EN
2
4