THERMEx METZ MEDIO III STRIP Instrucciones De Montaje página 62

62
THERMEX METZ MEDIO III STRIP
7
To install the hood, follow the instructions in the section corresponding to the type of installation you have chosen.
8
Place the motor in the desired location, and
pull the cable and vent from the
hood to the motor.
NOTE: When installing a vent on the motor,
the vent side must be mounted on
the flange with the non-return valve.
11
x8
Mount the flange on the motor with the inclu-
ded bolts and nuts.
1
Remove the motor housing from the conden-
ser housing.
9
Pull the other end of the extension cable
through the cover of the condenser housing
and the other flange.
12
Place the cover on the condenser housing.
2
Remove the flange on the side of the motor.
NOTE: Pay attention to the nuts on the inner
side of the motor housing.
10
Connect the extension cord to the socket on
the motor.
13
Place the included strips around the condenser
housing.
3
x4
Remove the motor from the motor housing.
M 423193251229082016
x4