Modo De Hora De Alarma - Technoline WS 8011 Manual De Instrucciones

PANTALLA
Modo de hora normal
1. AM/PM (formato de 12 h)
2. Temporizador
3. Humedad exterior
4. Indicador de señal de sensor
5. Indicador de previsión meteorológica
6. Indicador de batería baja para el sensor
7. Humedad interior

Modo de hora de alarma

1. Hora de alarma
2. Icono de alarma/
alarma conectada
3. Indicador de modo de alarma
GETTING STARTED
● Remove the battery door of the clock and sensor.
● Insert 4 new AA size batteries to the clock, and 2 to the sensor according to the "+/-"
polarity mark on the battery compartment.
● Replace the battery door.
● Once the batteries are inserted, full segment of the LCD will be shown.
● Press [RESET] button of main unit first, and press [RESET] button of transmitter.
● It will automatically receive 433 MHz signal from transmitter test.
● After 5 minutes, it will turn to RC signal reception automatically
● The RC clock will automatically start scanning for the radio controlled time signal
transmitted from Germany (DCF77).
Note: In some cases, you may not receive the signal immediately due to the atmospheric
disturbance, the best reception often occurs during nighttime.
8. Temperatura interior
9. Indicador MAX/MIN
10. Temperatura exterior
11. Alerta por hielo conectada
12. Indicador de fuerza de señal RC
ES 2