Building Factor (Build); Boiler Interface - Ferroli CRONO REM Manual De Usuario

12.4 Building factor (BUILD)

The building factor expresses the effect that the outside temperature transfers to the inside temperature and depends
on the type of construction.
This factor can be set via the "BUILDING FACTOR" parameter which determines the attenuation calculated on the
external probe measurement.
Range: 0...10 (0 no attenuation, 10 maximum attenuation)

13. BOILER INTERFaCE

The chronothermostat can be used as a remote interface of the boiler, setting AMBON = 0 and CL EN = 0.
In these conditions, the display shows the setpoint value sent to the boiler (CH SL).
88
cod. 3542A970 - Rev 01 - 03/2022
EN