DJO ARTROMOT-S4 Modo De Empleo página 98

Documentation
The Documentation function allows you to reproduce the therapy data saved by
the carriage.
The following documented data can be reviewed:
Total patient therapy time
The total patient therapy time is the added sum of operating hours
stored on the chip card.
(added sum of all therapy sessions stored on the chip card).
Deleting the stored therapy time on the chip card:
Select the function with the "OK" button: the stored period of time
will be displayed. Tap the "Reset" field for 3 seconds: a count-down
timer is displayed to reset the time; or select the "New Patient"
function.
Documentation of the therapy trend
This is a special function of ARTROMOT®-S4 that allows the entire
therapy documentation to be reviewed on the display.
The device run times as well as the range of motion of the sessions
are recorded.
Three displays are available, representing the three planes of mo-
tion. Each of them shows two curves in a coordinate system (X-axis
= ROM, Y-axis = time) and a green area between them.
The first display shows the anteversion (upper curve) and the retro-
version trend (lower curve).
The second display shows the abduction (upper curve) and the ad-
duction trend (lower curve).
The third display shows the external rotation (upper curve) and the
internal rotation trend (lower curve).
The different displays are selected by tapping the field below.
Deleting the stored documentation of the therapy trend:
The documentation is deleted with the "total patient therapy time"
(see above) or by selection of the "New Patient" function.
96