auna Connect System Manual De Instrucciones página 59

Sleep
To set the sleep timer, press the Sleep key on remote control repeatedly
to cycle through the sleep time options: Sleep OFF, 15 MINS, 30 MINS, 45
MINS or 60 MINS. Stop when the required time is displayed, after a brief
moment the screen returns to the screen being used before the sleep
function was selected. On the now playing screens the remaining sleep
time is displayed at the bottom of the screen. Alternatively select Menu >
Main menu > Sleep and select from the sleep time options. Once you select
a sleep period, the system returns to the main menu. Press Menu to return
to the now playing screen. To cancel a sleep time, select Sleep OFF from
the sleep options using either of the above methods.
Note: A sleep time is automacatically cancelled if radio put into Standby.
Alarms
To set or change an alarm, select Menu > Main menu > Alarms.
Select the alarm number (1 or 2) then configure the following parameters:
• Enable: Off, Daily, Once, Weekends or Weekdays
• Time: 12:00AM (adjust as necessary)
• Date: 01-01-2007 (adjust as necessary – this option is usually hidden and
only required if 'Once' is selected in the Enable field).
• Mode: Buzz, Internet radio, DAB or FM
• Preset: Last listened or 1-40
• Volume: 0- 32
• To sav these settings and set the alarm, scroll down and select save.
Notes
If you press Back or Menu to exit the Alarm settings without saving, a
dialogue screen is displayed asking if you wish to save the changes or not.
The now playing, screen shows active set alarms with an icon at the bottom
left. The standby screen shows active set alarms with a icon. At the set time,
the alarm will sound. To temporarily silence it, press OK knob. Press OK
knob repeatedly cycles through the available snooze periods: 5 Mins, 10
Mins, 15 Mins, and 30 Mins. The radio returns to standby for the set period,
with the silenced alarm icon flashing and a countdown of the remaining
snooze period. After the set snooze time the alarm will sound again. During
a snooze period, to change the snooze time, press OK knob to select a
new snooze time. Any remaining snooze time is reset to the selected time
period. To cancel a sounding alarm, or an alarm in snooze, press Standby.
EN
59