General Guidelines - Velleman SHE16 Manual Del Usuario

3. General Guidelines

Refer to the Velleman
manual.
Protect this device from shocks and abuse. Avoid brute force when operating the
•
device.
Protect the device against extreme heat and dust.
•
Familiarise yourself with the functions of the device before actually using it.
•
Damage caused by user modifications to the device is not covered by the
•
warranty.
Only use the device for its intended purpose. Using the device in an unauthorised
•
way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by
•
the warranty and the dealer will not accept responsibility for any ensuing defects
or problems.
4. Overview
Refer to the illustration on page 2 of this manual.
A heart beat indicator
B 3-digit display
C START/STOP button
D distance unit
5. Set-up
Refer to the illustration on page 2 of this manual.
Note: if in setup mode nu button is pressed for 60 seconds, the device will go into
standby mode and all default values are applied.
Press and hold START/STOP [C] and MODE [G] simultaneous for ±5s to reset and
•
enter setup mode.
The display shows CL CL CL CL (clock,) and ON
•
heart rate measurement. To switch the clock OFF
Press MODE [G] and set the minutes with START/STOP [C].
•
Press MODE [G]to confirm and set the hour with START/STOP [C].
•
Press MODE [G] to confirm and select the stopwatch time limit with START/STOP
•
[C]. Available options: 10, 30 (default) min, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 h. When
expired an alarm will sound.
Press MODE [G] and set heart rate measuring time (HP HP HP HP) with START/STOP [C].
•
Available options: 1 (default), 3, 10, 20, 30 min, 1h. When expired an alarm will
sound.
Press MODE [G] and set heart rate lower limit (Min) with START/STOP [C]. Range
•
from 30~194, default 50. When exceeded an alarm will sound.
Press MODE [G] and set heart rate upper limit (Max) with START/STOP [C]. Range
•
from 55~199 (step 5), default 150. When exceeded an alarm will sound.
Press MODE [G] and set your step length with START/STOP [C]. Range from
•
15~150cm, default 45cm. To determine your step length, choose a mark on the
floor, place your heel on the mark and take a number of steps. Measure the
®
Service and Quality Warranty on the final pages of this
E MODE indicator: stopwatch, step, calorie, distance
F 5-digit display
G MODE button: heart rate, stopwatch, step, calories,
distance
H max/min indicator
ON. This indicates that the clock is shown during
ON ON
SHE16
OFF, press START/STOP [C].
OFF OFF