PNI SafeHome PT225G Manual Del Usuario página 11

Troubleshooting
After powering up the detector, the LED flashes
for a long time
• The detector has probably not been
powered on for a long time or you have
tried to test the detector during the sensor
priming period. Power on the detector and
wait for the sensor to fully prime.
The LED flashes and the audible alarm sounds
continuously.
• The sensor is defective. Call a specialist
service center.
Cannot add the detector to the application.
• Too far from the router. Move the detector
closer to the router (max. 10 m).
11 - User manual