Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE G CLAMP
3
1-
Arm locking/unlocking lever
2-
Cooling pipe
3-
Gyroscope
4-
Pneumatic body
5-
Over-opening electrode
Clamp opening : push the button (FIG 2 - 10), the opening of the clamp can be released. The electrode retracts in the clamp leaving a space of
80 mm to access the welding area instead of 20 mm when not in use.
DISMANTLING THE PTI-S7 HARNESS
Disconnect the power supply to the PTI-S7.
1
2
Remove the two screws from the protective casing.
3
Remove the three nuts from the terminal block.
PTI-PRO RENOV CABLE
2
4
1
5
6
7
6-
Mobile arm
7-
Side handle
8-
Remote settings button
9-
Spot welding button
EN
8
9
19
Tabla de contenido
