Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2
Functions and Features
Table 2-5
Utility menu available settings
Feature
Default
BUZZER
ON
I/O
USB
TEMP UNIT
°C
LANGUAGE
L1
INPUT Z
10M
SELF TEST
OFF
P-ON RESET
ON
68
Available Settings
Enables or disables Diode, Stats, Limit,
and Hold beep operations.
Turning off the buzzer does not disable
ON or OFF
the front panel keys beep operation and
Continuity beep operation.
Refer to
more info.
– Disables or enables the GPIB, USB, or
RS232 remote interface
– If GPIB is selected, refer to
Utility Sub-Menu"
USB, GPIB, or
RS232
– If RS232 is selected, refer to
utility sub-menu"
– When all I/O are disabled, DISABLE is
shown on the setting.
Selects the unit for temperature
°C or °F
measurements
L1 represents Keysight Mode
L2 represents Fluke 45/8808A Mode.
L1 or L2
Refer to
function"
Sets the input impedance for DCV
10M or HIGH Z
measurements (HIGH Z is selectable for
100 mV and 1 V ranges only)
ON enables an immediate self-test of the
ON or OFF
multimeter. Returns to normal operation
after completing the self-test.
Disables or enables the automatic recall
ON or OFF
of the powered down state when power
is turned on
Description
"The beeper"
on page 75 for
"GPIB
on page 73
"RS232
on page 71
"Enabling the code compatibility
on page 93 for more info.
Remote Command
SYSTem:BEEPer:STATe
SYSTem:COMMunicate:
ENABle <mode>,
<interface>
UNIT:TEMPerature
<units>
SYSTem:LANGuage
[SENSe:]VOLTage[:DC]:
IMPedance:AUTO <mode>
*TST?
MEMory:STATe:RECall
:AUTO
Keysight 34450A User's Guide
Capítulos
Tabla de contenido
