Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1
Getting Started Tutorial
To easily configure and verify an interface connection between the 34450A and
NOTE
your PC, use the Automation-Ready CD, which is shipped with your 34450A. This
CD includes the Keysight IO Libraries Suite and the Keysight Connection Expert
application. For more information about Keysight's I/O connectivity software,
visit www.keysight.com/find/iolib.
Serial interface
To use this serial interface, it is recommended to use the optional
NOTE
Serial-to-RS232 adapter (34450A-700)
The 5-pin male connector on the meter's rear panel is a serial port or terminal to
form a minimal 3-wire RS-232 connection (TX, RX, GND).
In order to operate the multimeter via a host computer or terminal, the
parameters of the serial interface within the multimeter has to match the
parameters with the serial interface provided by the host or terminal.
The default settings of the meter are 9600 baud rate, non-parity, 8 data bits, and
1 stop bit (9600, n, 8, 1).
46
Keysight 34450A User's Guide
Capítulos
Tabla de contenido
