Idiomas disponibles
Idiomas disponibles
Programming the Control
Changing the temperature time periods
After you have set temperature settings for home, away and
asleep, you can program the time of day you want to use for
those temperature settings.
The thermostat has six time ranges called periods. They are
identified on the display as P1, P2, P3, P4, P5 and P6.
Period
P1
P2
P3
P4
P5
P6
What time blocks work for you? Write them in here and refer to this as you make the changes on the thermostat.
Period
P1
P2
P3
P4
P5
P6
Here's how to change the factory-set time periods.
1.
Open the door.
2.
Press the days (
) button. You will see 1 to 7 flashing
on the display.
3.
You must select one of these timeframe options – 1 to
7, 1 to 5, 6 to 7 or individual day (1, 2, 3, 4, 5, 6, 7) – by
pressing the days (
make your selection by pressing the days (
again. (Select 1 to 7 if your individual day schedules
are same.)
4.
When you have selected one of the options (1 to 7, 1
to 5, 6 to 7 or individual day), press the period (
button. You will see P and a flashing 1 on the screen.
This is period 1 (P1), which begins at 6:00 AM.
5.
To change the hours in P1, press the start time (
button.
6.
You will see the hours in 6:00 AM flashing on the
screen. Press the up or down button and stop on the
desired time.
8
) button again. You may also
) button
The thermostat has preset periods (see below), but you can
change these to fit your lifestyle.
Period Start Time
6:00 AM
8:00 AM
17:00 PM
22:00 PM
23:00 PM
00:00 AM
Your Hours
)
)
Capítulos
