User Maintenance Instructions; Care & Cleaning Instructions; Care And Cleaning; Storing Instructions - Bella MINI DONUT MAKER Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SO-307530 BELLA DN Maker IM Interior r2_Layout 1 12-02-22 12:18 PM Page 7

USER MAINTENANCE INSTRUCTIONS

This appliance requires little maintenance. It contains no user serviceable parts. Do not try
to repair it yourself. Contact a qualified appliance repair technician if the product requires
servicing.

CARE AND CLEANING

CAUTION: Unplug from electrical outlet and allow to cool thoroughly before cleaning.
1.
The Mini Donut Maker does not disassemble for cleaning.
2.
Never immerse appliance in water or other liquids. Never place Mini Donut Maker
in dishwasher.
3.
The mini donut cooking plates should be cleaned and conditioned before each heating.
4.
Brush cooking plates with a clean, soft pastry brush or cloth. To condition plates,
lightly coat the cooking surfaces with solid vegetable shortening or vegetable oil. Carefully
follow suggested cleaning procedures below. After a time, if mini donuts show signs of
sticking, recondition as needed.
5.
To protect the premium quality non-stick surfaces, use only plastic, nylon or wooden
utensils.
6.
To remove any batter baked onto the cooking plates, pour a small amount of cooking oil
onto the hardened batter. Allow to set for 5 minutes, then wipe softened batter off
with a paper towel or soft cloth. Remove stubborn stains with a plastic mesh puff or pad.
A clean round kitchen brush or a toothbrush works well to remove baked-on batter
from the molds. For best results, use only products with directions stating they are safe
for cleaning non-stick cooking surfaces. Do not use steel wool or coarse scouring pads.
7.
The exterior finish should be cleaned with a non-abrasive cleaner and a soft, damp cloth.
Dry thoroughly.

STORING INSTRUCTIONS

1.
Make sure unit is unplugged and fully cooled.
2.
Secure the lid shut with the latch.
WARNING: Never store Mini Donut Maker while it is hot or still plugged in.
3.
Use the cord wrap on the bottom of the Mini Donut Maker to store the cord.
(See Figure 2.)
Figure 2
4.
Do not put any stress on cord where it enters unit, as this could cause cord to fray
and break.
5.
Store Mini Donut Maker in its box or stand unit on its end for easy and compact storage
7
Tabla de contenido
loading

Tabla de contenido